Description

Presse à balles de recyclage TONNA10

La presse à balles de recyclage TONNA10 a été largement utilisée pour presser les cartons, le fil de coton, le plastique, le bois, etc. La presse hydraulique verticale est le moyen le plus efficace de réduire le coût des déchets pour l’enlèvement ou le stockage en toute sécurité. La presse à balles de carton est conçue comme une structure verticale, la presse est faite par transmission hydraulique. La presse à balles de recyclage TONNA10 produit 10 tonnes de pression. L’opérateur contrôle la presse à carton par commande électrique. Lorsque le processus de pressage est terminé, l’opérateur doit lier manuellement la sortie avec un fil de fer ou une bande de plastique. La taille de la benne est de  700mm X 500 x 1000 mm (W x D x H) et peut peser jusqu’à 80 kg, selon les matériaux placés dans la presse à balles de recyclage. La presse à balles de recyclage peut produire entre 6 et 8 paquets par heure. Les dimensions des compacteurs de carton TONNA10 sont de 1040 x 720 x 2300 mm (W x D x H) et la presse verticale pèse 550kg. Nous offrons une livraison rapide dans l’UE et une garantie.

Quel est le prix de la presse a cartons TONNA10

Cardboard baler TONNA10 is made of high-quality materials, it has a powerful 1,5 kW Single Oil cylinder motor, which produces 10 tons of pressure which can easily squeeze plastic, wood, paper, glass, and other waste materials. The price of Cardboard baler TONNA10 is still very competitive. The price of the Recycling baler TONNA10 is displayed at the beginning of the webpage. We can say that it is the cheapest cardboard compactor with these characteristics on the EU market. However, the price of the Recycling baler TONNA10 does not reflect the quality. Despite it being affordable, the vertical baler is made out of high-quality metal and strong and reliable components. Recycling baler TONNA10 has all needed certificates, and even exceeds industry standards and requirements.

Main Features of cardboard compactors TONNA10

• Affordable & low maintenance Recycling baler TONNA10
• Pressure: 10 tons
• Motor: 1,5 kW Single Oil cylinder
• Power Supply: 220 – 230 V, 1.5 kW 13 Amp
• Bale dimensions: 700mm X 500 x 1000 mm (W x D x H)
• Bail Weight: 70-80kg
• Output: 6-8package/hours
• Machine size: 1040 mm*720 mm*2300 mm (W x D x H)
• Easy to use and simple to install
• Noise Level: 72 decibels
• Cycle Times: 24 seconds
• Electronic command control system

Advantages of vertical baler TONNA10

• Suitable for positioning where space is limited
• For small to medium volumes of waste
• Adopting a hydraulic drive mechanism
• Use less energy, but still has huge operating energy – pressure
• Electric button control can reach manual adjusting and semi-automatic control
• Independent feeding opening with automatic pulling out installation, to reduce labor force
• Vertical baler TONNA10 is mainly used for baling cartons, cotton yarn, plastic, wood, etc.
• Cardboard compactors are designed as vertical structures, have a hydraulic transmission and electrical control. Binding is manual

Transport of Recycling baler TONNA10

The recycling baler can be easily moved by a stacker or forklift. Transport can be done by van or LKW. Cardboard baler is placed in the wooden box horizontally, therefore, it can easily go into production halls or warehouses even with lower doors. 

Specification of Recycling baler TONNA10

How does the Cardboard baler TONNA10 work?

The installment of the vertical baler TONNA10 is fairly simple. Basically, all you need to do is connect the air pressure and plug in the electricity and you are ready to go. The first step after the cardboard baler is installed is to pull the squeeing hammer up, so the space, where you will put waste material, is empty. This can be done simply by moving the handle. Then you need to put the waste material inside the cardboard baler. You can fill the vertical baler with plastic, wood, cardboard, paper, glass, and also other waste materials. Fill it to the edge of the Cardboard baler. Then press the handle and the hydraulic hammer will start moving down and squeezing the waster material with pressure. The squeezing process can take a couple of minutes. When the squeezing is over, move the handle and bring the hammer up. Because of the pressure, the material will be squeezed in the bale which needs to be manually bound with a wire or strap. When the bale is bound open the door of the recycling baler and remove the bale by hands or forklift.

Recycling baler video

Informations complémentaires